Shamsi Solar Inverter

About Shamsi Solar Inverter

UTL’s solar inverter is the most preferred solar inverter and leading in India. There is Shamsi solar inverter that is widely used in the home, offices, commercial, and industrial sectors. There are various models in Shamsi solar inverter (675VA/12V to 1475VA/24V) depends on it voltage.

Since power usage from the grid is secondary, grid power is only used when solar power is not present and the battery voltage level is reduced to a certain level. Grid power is also needed when solar power is reduced to a certain level and battery voltage is reduced to a certain level.

Get UTL Shamsi Solar Inverter at Home Inverter Price Click Here

साधारण Home Inverter Prices पर UTL Solar Inverter Shamsi लीजिये क्लिक करें

Shamsi solar inverter has the advance features like PWM solar charge controller, most advanced LCD features, maximum preference to solar, capability of 100% panel rating, built in IT Mode etc.

675 – 12V/25A Shamsi Solar Inverter

Particulars	Description
Model	675/25A 12V
Nominal Grid Voltage	230V 1Φ
Battery Low Buzzer	10.8V ± 0.2V (Each battery )
Battery Low Cut	10.5V ± 0.2V (Each battery )
Battery High Cut	17V ± 0.2V (Each battery )
SPV Current	25A
Grid – Battery Charging Voltage (Equalize)	After 30 Days
Grid – Battery Charging Current	10A/12.5A ± 2A
Grid Reconnect @ Battery Voltage	11.8V ± 0.2V (Each battery )
Output Phase	1 Phase, 3Wire
Nominal Output Voltage	240V ± 10% RMS
Nominal Frequency	50Hz±1%
Output Waveform	Modified Sinewave
Typical Efficiency	≥82%
Protection	Overload, Battery Low, Battery High, Output Short Ckt, Battery Reverse (Fuse Blown), Over Heat @90C ± 10C , SPV High , I/P HV, I/P LV
LED Indication	System ON, (IT mode, SMF/TUB, Boost Chg, Grid Chg.)Enable/Disable, Mains Status, Overload, Grid chg., Inverter ON, Battery Status, SPV Chg., Fault
Switches	System ON, (IT Mode, SMF/TUB, Boost Chg, Grid Chg.) Enable/Disable
Type of Charger	PWM
Efficiency	>95%
Input Voltage Range (Min – Max)Voc	17V-25V
Maximum PV Power Recommended	(150W/160W)X2 (Parallel)
Operating Temperature	0-50°C
MRP ( Inclusive of all Taxes )	Rs. ~~6,264.00~~
Discounted Price ( Inclusive of all Taxes )	Rs. 6,264.00

875 – 12V/50A Shamsi Solar Inverter

Particulars	Description
Model	875/50A 12V
Nominal Grid Voltage	230V 1Φ
Battery Low Buzzer	10.8V ± 0.2V (Each battery )
Battery Low Cut	10.5V ± 0.2V (Each battery )
Battery High Cut	17V ± 0.2V (Each battery )
SPV Current	50A
Grid – Battery Charging Voltage (Equalize)	After 30 Days
Grid – Battery Charging Current	10A/12.5A ± 2A
Grid Reconnect @ Battery Voltage	11.8V ± 0.2V (Each battery )
Output Phase	1 Phase, 3Wire
Nominal Output Voltage	240V ± 10% RMS
Nominal Frequency	50Hz±1%
Output Waveform	Modified Sinewave
Typical Efficiency	≥80%
Protection	Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High.
LED Indication	System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable, Mains Status, Overload, Grid Chg., Inverter ON, Battery Status, SPV Chg., Fault
Switches	System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable
Type of Charger	PWM
Efficiency	>95%
Input Voltage Range (Min – Max)Voc	17V-25V
Maximum PV Power Recommended	(150W/160W)X4 (Parallel)
Operating Temperature	0-50°C
MRP ( Inclusive of all Taxes )	Rs. ~~8,305.00~~
Discounted Price ( Inclusive of all Taxes )	Rs. 6,496.00

1075 – 12V/50A Shamsi Solar Inverter

Particulars	Description
Model	1075/50A 12V
Nominal Grid Voltage	230V 1Φ
Battery Low Buzzer	10.8V ± 0.2V (Each battery )
Battery Low Cut	10.5V ± 0.2V (Each battery )
Battery High Cut	17V ± 0.2V (Each battery )
SPV Current	50A
Grid – Battery Charging Voltage (Equalize)	After 30 Days
Grid – Battery Charging Current	10A/12.5A ± 2A
Grid Reconnect @ Battery Voltage	11.8V ± 0.2V (Each battery )
Output Phase	1 Phase, 3Wire
Nominal Output Voltage	240V ± 10% RMS
Nominal Frequency	50Hz ± 1%
Output Waveform	Modified Sinewave
Typical Efficiency	>80%
Protection	Overload, Battery Low, Battery High, Output Short Ckt, Battery Reverse (Fuse Blown), Over Heat @90C ± 10C , SPV High , I/P HV, I/P LV
LED Indication	System ON, (IT mode, SMF/TUB, Boost Chg, Grid Chg.)Enable/Disable, Mains Status, Overload, Grid chg., Inverter ON, Battery Status, SPV Chg., Fault
Switches	System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable
Type of Charger	PWM
Efficiency	>95%
Input Voltage Range (Min – Max)Voc	17V-25V
Maximum PV Power Recommended	(150W/160W)X5 (Parallel)
Operating Temperature	0-50°C
MRP ( Inclusive of all Taxes )	Rs. ~~8,305.00~~
Discounted Price ( Inclusive of all Taxes )	Rs. 7,644.00

1475 – 24V/50A Shamsi Solar Inverter

Particulars	Description
Model	1475/50A 24V
Nominal Grid Voltage	230V 1Φ
Battery Low Buzzer	10.8V ± 0.2V (Each battery )
Battery Low Cut	10.5V ± 0.2V (Each battery )
Battery High Cut	17V ± 0.2V (Each battery )
SPV Current	50A
Grid – Battery Charging Voltage (Equalize)	After 30 Days
Grid – Battery Charging Current	10A/12.5A ± 2A
Grid Reconnect @ Battery Voltage	11.8V ± 0.2V (Each battery )
Output Phase	1 Phase, 3Wire
Nominal Output Voltage	240V ± 10% RMS
Nominal Frequency	50Hz±1%
Output Waveform	Modified Sinewave
Typical Efficiency	≥88%
Protection	Overload, Battery Low, Battery High, Output Short Ckt, Battery Reverse (Fuse Blown), Over Heat @90C ± 10C , SPV High , I/P HV, I/P LV.
LED Indication	System ON, (IT mode, SMF/TUB, Boost Chg, Grid Chg.)Enable/Disable, Mains Status, Overload, Grid chg., Inverter ON, Battery Status, SPV Chg., Fault
Switches	System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable
Type of Charger	PWM
Efficiency	>95%
Input Voltage Range (Min – Max)Voc	31V-49.5V
Maximum PV Power Recommended	(315W/320W/325W)X4 (Parallel)
Operating Temperature	0-50°C
MRP ( Inclusive of all Taxes )	Rs. ~~11,221.00~~
Discounted Price ( Inclusive of all Taxes )	Rs. 10,306.00

Special Features of Shamsi Solar Inverter

Maintain Battery Health for Longer Life

The Shamsi solar inverter feeds the battery installed to it at a constant boost charging current until its voltage reaches 14.58V and the float current, which maintains the voltage above 13.8V.

Modified Sine Wave Output

A sine wave output is also known as waveform for electronic equipment. The incoming AC line is a sine wave, thus electronic equipment expects to see this type of waveform. A sine wave is the most expensive output form for solar manufacturers to produce due to more complex circuitry and components.

Inbuilt IT Mode

IT loads which provide protections to IT instruments like computers, printers etc. In IT mode the change over time is very less so that there shouldn’t be any kind of breakdown in power supply.

Charging Multi

To increase the life of battery maintains the gravity and temperature and to increase the backup of battery we use the stages of charging and equalize automatically in a month.

Operate without Solar

Solar inverter of shamsi series can be operated with or without solar panel. The user can use solar inverter as a regular inverter without bothering about use of solar energy.

Easy Installation & Low Maintenance

Shamsi solar inveter is extremely easy to install and is available at a very low budget. It also helps in reducing the electricity costs.

FAQs about Shamsi Solar Inverter

Q. What is IT mode?

Answer. IT mode is provide protections to IT instruments like computers, printers etc. In IT mode the change over time is very less so that there shouldn’t be any kind of breakdown in power supply.

Q. Which types of protection are available in Shamsi solar inverter?

Answer. The protections are Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High.

Q. Can we run Shamsi solar inverter without solar panels?

Answer. Solar inverter of Shamsi series can be operated with or without solar panel. You can use solar inverter as a regular inverter without bothering about use of solar energy.

Q. What is the price of 1075 – 12V/50A Shamsi Inverter?

Answer. The best selling and discounted price of – 12V/50A Shamsi Solar Inverter is Rs. 6380.

Client Details